919904514703 919904514703

Nitrile Rubber Sheets and Rolls

Nitrile Rubber Sheets and Rolls

Business Type : Manufacturer, Exporter, Supplier, Retailer

Preferred Buyer From

Location Anywhere in India

DESCRIPTION : Nitrile Rubber is a copolymer of butadiene and acrylonitrile. Nitrile rubber sheets are mainly used as oil & solvent resistance as it has good tensile strength, low compression set, flexibility & impermeability to gases. These sheets are very good resistance to petroleum based products having recommended for operating temperature from (-20°C to +110°C).

 

APPLICATIONS : These sheets / rolls are mainly used for sealing, gasket & packing to avoid leakages from oil, solvent, petroleum based fluids, lubricating oil, transformer fluid & sealing against gases.

 

PROPERTY :

  • Very good resistance to petroleum based fluid goods & high temperature resistance up to 110°C.
  • Very low-level permeability to gases. Poor ozone resistance.

 

RECOMMENDATIONS REGARDING STORAGE AFTER RECEIPT

  • Store according to DIN 7716 standards.
  • Products must be stored in cool, dry places with temperature ranging between 10°C to 30°C, sheltered from the sun & free from ozone for better shelf life.
  • Avoid contact with acids & alkalies.
  • If there is any doubt about the condition of sheet/roll, they should be retested before putting into service.
  • Products should be issued in the order of their date of manufacture.

Yes! I am interested

Submit Your Requirement


100% NITRILE RUBBER SHEET : BLACK

GRADES DENSITY (g/cc) HARDNESS (SH–A) TENSILE (Kg/cm2) Eb (%)
BNT-1240 1.2 40 60 500
BNT-1350 1.3 50 70 450
BNT-1460 1.4 60 80 400
BNT-1570 1.5 70 80 300

COMMERCIAL GRADE NITRILE RUBBER SHEET

GRADES NEOPRENE (%) DENSITY (g/cc) HARDNESS (SH–A) TENSILE (Kg/cm2) Eb(%)
BNTNR-50 50 1.6 65 20 250

PRODUCT DIMENSIONS (Rotocure Finish)

SIZE (Mtrs) THICKNESS (MM)
1.2 x 10, 20, 30 3 to 12
Finish Smooth / Texture Impression

PRODUCT DIMENSIONS (Plate Finish)

SIZE (Mtrs) THICKNESS (MM)
1.2 x 2.4 3 to 25
1.0 x 2.0 3 to 25

MANUFACTURING TOLERANCES

THICKNESS WIDTH LENGTH HARDNESS DENSITY
+ / -  0.3mm or 10% whichever is higher + / -  2% + / -  5% + / -  5 + / - 0.05

  • Explore More Products




Looking for "Nitrile Rubber Sheets and Rolls" ?