Boron Rubbers India



Contact Us

Boron Rubbers India

52, GIDC, Chitra, Opp. Post Office, Bhavnagar, Gujarat - 364004, India

Mobile : +91-9904514703, +91-9227715049

Phone : +91-278-2447361, +91-278-2445049

Fax : +91-278-2445049

Call Us : 08045134772

EPDM Rubber Sheet


EPDM Rubber Sheet

EPDM Rubber Sheet / roll is very good weatherproof quality that makes highly recommended for the outdoor use, These sheets resist to oxidation, UV rays, Ozone, weathering & low temperature flexibility. The operating temperature range is from (-40°C to +130°C). EPDM rubber sheets / rolls are stable for long time due to its inert structure.

Applications :
EPDM rubber sheets are highly used for industrial & outdoor application like weather strips, drinking water applications, rain water sealing, protection against sunlight & heat gaining as a roofing membrane & acid resistance applications. Also useful as a liner in pulverizing system.

Properties :
Very good resistance to water & water-based chemicals withstand temperature up to 130°C. Very good weathering resistance. Good resistance to mild acids, liquid fertilizer & break fluids. No resistance to oil & oil based products.

Recommendations Regarding Storage After Receipt
  • Store according to DIN 7716 standards. Products must be stored in cool, dry & dark places.
  • Avoid contact with hydrocarbons, solvents, acids alkalies.
  • If there is any doubt about the condition of sheet/roll, they should be retested before putting into service.
  • Products should be issued in the order of their date of manufacture.


Details

100% EPDM Rubber Sheet: Black
Grades

Density (g/cc)

Hardness (SH – A)

Tensile (Kg/cm2)

Eb (%)

BEP – 1155 1.1 55 70 500
BEP – 1260 1.2 60 80 400
BEP – 1365 1.3 65 100 300
BEP – 1470 1.4 70 70 250

 

Commercial Grade EPDM Rubber Sheet
Grade EPDM (%) Density (g/cc) Hardness (Sh – A) Tensile (kg/cm2) Eb (%)
BEPNR–50 50 1.5 65 50 250

 


Product Dimensions

 

 Rotocure Finish

Size (Mtrs) Thickness (MM)
1.2 X 10,20,30 3 TO 12
Finish Smooth/Texture impression

 

 

Plate Finish

Size (Mtrs) Thickness (mm)
1.2 X 2.4 3 TO 25
1.0 X 2.0 3 TO 25

 

 

Manufacturing Tolerances

Thickness Width Length Hardness Density
+/- 0.3mm or 10% whichever is higher +/- 2% +/- 5% +/- 5 +/- 0.05