Boron Rubbers India



Contact Us

Boron Rubbers India

52, GIDC, Chitra, Opp. Post Office, Bhavnagar, Gujarat - 364004, India

Mobile : +91-9904514703, +91-9227715049

Phone : +91-278-2447361, +91-278-2445049

Fax : +91-278-2445049

Call Us : 08045134772

Commercial Rubber Sheet


Commercial Rubber Sheet

A general-purpose Commercial Rubber Sheet used for gasket & packing purpose in industrial applications. These sheets / rolls are made from Prime polymer blended with reclaim rubber. As it is cured using compression moulding & rotary drum curing system available in smooth & cloth impression finish with or without choice of insertion.

Application : This commercial rubber sheets / rolls are mainly used for flange gasket packing to avoid leakages from air, water & inorganic chemicals, machinery packing pads, anti vibration pads & flooring purpose.

Property : Good resistance to inorganic chemicals, water, air & heat up to 70oC. Poor resistance to Ozone, UV, Sunlight, oil & solvents & organic chemicals.

Boron Rubbers India has custom designed this rubber to meet many application on several different levels while maintaining a very economical basis for a rubber sheets / rolls.

Recommendations Regarding Storage of the Products :
  • Do not expose rubber sheet to direct sunlight, sheets away from heat source, preferably in dark, air ventilated room will help give longer life & optimum properties.
  • Do not remove polythene packing before use to prevent it from exposure of atmospheric oxygen, ozone & polluted air. Do not store rubber sheet rolls in open, even after covering it with tarpaulin to protect from air & rain. Always keep roll in vertical position ONLY.
  • Keep rolls away from solvent, oil & fuel storage. Do not use hooks while loading/unloading the rolls. Inspect sheet for smooth surface & hardness (with rubber hardness tester).

Color : Black


Grades

Grades Density (g/cc) Hardness (SH–A) Tensile (Kg/cm2) Elongation (%)
BRZ–1560 1.50 70 25 200
BRZ–1665 1.60 65 20 175
BRZ–1870 1.80 60 15 150

 


Product Dimensions

 Rotocure Finish
Size (Mtrs) Thickness (MM)
1.2X10,20,30 3to 12
Finish Smooth/Texture impression

 

Plate Finish

Size (Mtrs) Thickness (MM)
1.2X2.4 3 to 25
1.0X2.0 3 to 25

 

 

Manufacturing Tolerances

Thickness

Width Length Hardness Density
+/- 0.3mm or 10% whichever is higher +/-­  2%

+/-5%

+/-5 +/-0.05